Modify your Williams' Star Trek: The Next Generation with this unique Pop Bumper Cap set. This kit/set features:

1. A set of 3 caps as pictured featuring the Next Generation communication badge as seen on the crew's uniforms. These Caps are manufactured as follows:
   
   • All Metal, Zinc Alloy construction.
   • Highly polished raised "Silver" plate.
   • Highly polished raised "Gold" plate for the insignia background.
   • Heat cured Black enamel for the cap's background.
   • Comes with two identical round caps and one "cut down" cap to fit under STNG's beta ramp.


2. One set of Acrylic LaserCut UnderCaps. One Red, Yellow, and light Blue. Each Undercap has double sided Matte finish to diffuse the LED light.
   
3. 3 qty Comet Pinball's 4SMD #555 low profile led matched to undercaps ordered
   
4. 6 qty #4-40 x 1/2" countersunk Stainless Steel screws.
   

*** This design is Copy Protected 2017 by John Zitterkopf and may not be duplicated for any reason. ALL RIGHT RESERVED! ***

Installation Instructions

Example Installation (using modified BriteMods' BriteCap EVO LEDs [See Appendix A of the Instructions above]):

Options include:

• UnderCaps:
• Standard option: 1 Red, 1 Blue full Undercap and 1 yellow "Cut Cap"
• Substitution for All Red Matte UnderCaps.
• Substitution for All Purple Matte UnderCaps.
• Stock RYB UnderCaps w/ 2 additional Red Matte UnderCaps for those who want to experiment.
• Stock RYB UnderCaps w/ 3 additional Purple Matte UnderCaps for those who want to experiment.
• LEDs:
• No LEDs for those who might have these LEDs in their parts bin. optional
• 3qty 4-SMD Undercap Matched LEDs standard option - Pick one
  • 1ea Red, Blue, Warm-White 4-SMD #555 LEDs Example Install
  • 3ea Red 4-SMD #555 LEDs
  • 3ea Purple #555 LEDs
• 3 qty 11-SMD popbumper LEDs optional
  • 1ea Red, Blue, Warm-White 11-SMD Example Install
  • 1ea Red, Cyan, Warm-White 11-SMD (matches Troi's uniform color) Example Install
  • 3ea Red 11-SMD
  • 3ea Purple 11-SMD Example Install
• SMT LEDs:
• none standard option
• 19qty SMT purple LEDs for reworking the underside of the Evo caps. optional See install documentation (above Appendix A), soldering required

Available Options:

LEDs:
Not Included (-$1.84)4-SMD (RBWW)1-SMD (All Purple)4-SMD (All Red)11-SMD (RBWW) (+$12.26)11-SMD (R,Cyan,WW) (+$12.26)11-SMD (all Red) (+$12.26)11-SMD (all Purple) (out of stock) [+$12.47]
SMT LEDs:
none19 EVO LEDs - Purple (+$9.78)
UnderCap Color:
Red, Yellow, Blue MatteAll Red Matte (+$10.48)All Purple Matte (out of stock) [+$13.97]RYB + 2 Red Matte (+$19.53)RYB + 3 Purple Matte (out of stock) [+$23.74]