- Out of stock -
Out of Stock, Get notified when re-stocked
Save a Bookmark for this page
These are the last 9 complete sets we will ever have available. Once these are gone; these will only be available second-hand on actual machines.
Limit One set per customer while supplies last.
Modify your Stern Star Trek with this unique Pop Bumper Cap set. This kit/set features:
- A set of 3 different caps as pictured featuring Science, Command, and Engineering Insignias from the JJAbrams Star Trek Universe. Please note: The Caps are not interchangeable. They are specific to the pop bumpers shown below. These Caps are manufactured as follows:
- CNCed out of 6061 Alumimum.
- Anodized Black.
- Raised Silver insigna.
- One set of Acrylic LaserCut UnderCaps. One Red, Yellow, and light Blue. Each Undercap has double sided Matte finish to difuse the LED light.
- 3 qty Comet Pinball's 5SMD #555 low profile Natural White LEDs
- 6 qty #4-40 x 1/2" countersunk Stainless Steel screws.
- Includes USS Vengeance Nacelle mod.
*** This design is Copy Protected 2014-2021 by John Zitterkopf and may not be duplicated for any reason. ALL RIGHT RESERVED! ***
Pinball SuperNova has also published a video for installing this popbumper cap kit in a Premium:
Gweempose (a pinside moderator) reports that this screwdriver makes it possible to install the science cap without removing the beta ramp - IF you have nibble fingers. I don't - but passing it along incase it helps someone.
- 9 complete sets with 1 Command, 1 Science, and 1 Engineering cap
- 3 partial sets with 1 Command and 1 Engineering Cap. (discounted)
- Substitution for All Blue Matte UnderCaps.
- Stock RYB UnderCaps w/ 2 additional Blue Matte UnderCaps for those who want to experiment.
- No LEDs for those who might have these LEDs in their parts bin
- 3 Natural White LEDs standard option
- 3 stock Natural White LEDs plus 1 red and 1 ice blue #555 LED for those that may want to experiment with LED lighting.
These caps WILL NOT
work with standard height lamps. Low Profile LEDs are required.